This video embed source from YouTube and uploaded by ChrisFix on YouTube.

How To Install A Hidden Kill Switch In Your Car Or Truck Cheap Anti Theft System

  • About
  • Download Video
  • Embed Video
  • Comments
Description:

Instead of installing an expensive car alarm system or using ineffective methods to prevent your car from getting stolen, learn how to install an inexpensive, hidden kill switch. http://simplisafe.com/dreamcar

This kill switch is easy to install and anyone can do it at home with basic tools. It can also work along with your car's current alarm system. How it works is it cuts the power to the fuel pump so you cannot jump start the car, hot wire it, or even push start it. In order to steal the car you need to tow it! It is better than a batter quick disconnect because your computer wont restart and you wont lose your radio stations.

Dream Car: https://www.youtube.com/watch?v=Z5x22ef7A-w

Products Used:
Automatic Wire Strippers: https://amzn.to/2GTH0zS
Crimping Pliers: https://amzn.to/2DGxkqn
On/Off Switch: https://amzn.to/2USastQ
Heat Shrink Butt Connectors: https://amzn.to/2WdZpwt
16 Gauge Wire: https://amzn.to/2ZKsDVU
Spade Connectors: https://amzn.to/2GTgab8
Inexpensive Multimeter: https://amzn.to/2XPyxTY

→ Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7
→ Instagram: https://www.instagram.com/chrisfixit
→ Facebook: https://www.facebook.com/chrisfix8
→ Website: http://www.ChrisFixed.com
→ My Channel Home Page: https://www.youtube.com/ChrisFix

**If the video was helpful, remember to give it a "thumbs up" and consider subscribing.**

Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.
How To Install A Hidden Kill Switch In Your Car Or Truck Cheap Anti Theft System
Uploaded on YouTube by ChrisFix

kill switch,alarm system,car alarm,how to make a kill switch,how to install an alarm,ChrisFix,honda,del sol

Download This Video:

Embed this

Related Videos

How To Fix A FREE CAR That Cranks But Wont Start
How To Fix A FREE CAR That Cranks But Wont Start

by ChrisFix

Car wont start but cranks? Learn how to fix a car that turns over but wont start. I also show how to fix a car that has been sitting for a long time! I go though 5 quick steps on how to find the reason your car doesn't start! Every engine needs Fuel, Air, Spark, Compression and Timing. Tools and Products I used: Battery Charger: https://amzn.to/2pEs8ft Spray Fogging Oil: https://amzn.to/2pGSkpL Mechanic's Stethoscope: https://amzn.to/2C0ugW4 Spark Tester: https://amzn.to/2y4k0t8 Good Compression Tester: https://amzn.to/2Rw2c2c → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

What Is A Good Deal When Buying A Used Car How To Buy A Used Car
What Is A Good Deal When Buying A Used Car How To Buy A Used Car

by ChrisFix

Learn how to call the owner of a used car, figure out what the car is worth, run a free VIN number check, and many other tips and tricks. If you see a used car for sale on the side of the road and want to know if it is worth going for a test drive, I go though all of the things you want to do before you go on the test drive. This way you wont waste your time and so you don't get ripped off! Episode 1: The "Side of the Road Inspection": https://youtu.be/vC8LbvYk6es?list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Episode 3 Engine Inspection: https://youtu.be/HDv5bUR_Plo?list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Episode 4: Interior & Exterior Inspection: https://youtu.be/sSi8xuRm5eE?list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Episode 5: Test Drive and Negotiation: https://youtu.be/drbhNLvYxGQ?list=PLvKbarVtwhUv6bjLhJSyaEOxaYy03j7QS Link to the FREE downloadable ChrisFix Used Car Inspection Checklist: https://goo.gl/uqaWYa OBD2 Scanner I use: http://amzn.to/1XNUGfz Free VIN Check (stolen car and salvage): https://www.nicb.org/theft_and_fraud_awareness/vincheck Free VIN Check (recalls): https://vinrcl.safercar.gov/vin/ KBB Trade in Value Calculator: http://www.kbb.com/whats-my-car-worth/ NADA Trade in Value Calculator: http://www.nadaguides.com/Cars Become a ChrisFix Subscriber→ http://www.youtube.com/subscription_center?add_user=paintballoo7 Instagram→ https://www.instagram.com/chrisfixit Facebook→ https://www.facebook.com/chrisfix8 Website → http://www.ChrisFixed.com My Channel Home Page → https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Thursday** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

How To Install A Short Throw Shifter
How To Install A Short Throw Shifter

by ChrisFix

Short throw shifter. In this video I show you how a short shifter works and how to install one in your car. I also compare the difference between a stock shifter and an aftermarket short throw shifter so you can see the drastic improvement in the DriftStang! Short Shifter: https://goo.gl/IhF5R5 Thread Locker: http://amzn.to/2eWFcYY Feeler Gauge: http://amzn.to/2eSqAq4 RTV Gasket Maker: http://amzn.to/2fP16Lr Small Torque Wrench: http://amzn.to/2g9y2T8 Plastic Gasket Scraper: http://amzn.to/2eSs6IR Bushing: https://goo.gl/69iSgj Silicone Gasket: https://goo.gl/g9M7ay *This exact procedure works on 1982-2004 Mustangs with a T5 or T45 manual transmission. The process is similar on most other manual cars. → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

I Bought The Most Hated Car On The Internet and Made 1000
I Bought The Most Hated Car On The Internet and Made 1000

by ChrisFix

Prius hybrid battery replacement. Learn how to replace a hybrid battery in a 04-09 Toyota Prius and make money while you're at it! Replacing a hybrid battery is not difficult at all. I show you how to scan the computer to check the hybrid battery and we got a P0A80 code which means replace hybrid EV battery. I also show you how to clean the hybrid battery fan to keep the battery cool. To remove a Toyota Prius hybrid battery you remove a few interior trim pieces, unbolt the hybrid battery, swap out battery cells, and reinstall. While I did fix a Prius, you can apply the same process to many other hybrids like Honda, Chevy, Nissan, Ford, and Lexus. So whether you are Prius to fix and flip for a quick profit wheeler dealer style, or you want to fix your hybrid so you can continue to use it, here is the in-depth video on how to replace a hybrid battery safely and easily. **Where to get quality Hybrid Batteries:** https://www.electronautomotive.com Printable step-by-step directions: http://bit.ly/PriusHybridBattReplace Tools: OBD2 Scanner: https://amzn.to/2Dr0hHO Impact gun: https://amzn.to/2Tj9CH6 Panel Clip Pliers: https://amzn.to/2DH9IDF In-lbs Torque Wrench: https://amzn.to/2DpQq4M Ft-lbs Torque Wrench: https://amzn.to/2DlFDJ3 Plastic Trim Clips: https://amzn.to/2DLJuQy #YouTubeLearning → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing. New videos every Week** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Ken Block’s Raptor Powered... Supra?? Plus, Indoor Burnout!
Ken Block’s Raptor Powered... Supra?? Plus, Indoor Burnout!

by Ken Block

The People Over At Supra Boats Must Have Built This Thing From My Thoughts Ha Ford Raptor Engine Powered Full Onboard GoPro Integration Easy Wake Settings And More This Thing Rips Check Out This Mini Walkthrough Of The Boat Some Wake Shredding An Indoor Burnout And Our Buddy Forests Final Episode Enjoy Subscribe To My Channel For More HttpswwwyoutubecomchannelUCpCJ0y y03qPlG4zrYAAvQsub confirmation1 Follow Me On Instagram kblock43 Follow On Facebook Facebookcomkenblockracing Rad Gear That The Hoonigans Make For Me Httpswwwhoonigancomcollectionsken block

How To Rebuild The Entire Front Suspension In Your Car Or Truck
How To Rebuild The Entire Front Suspension In Your Car Or Truck

by ChrisFix

Learn how to replace the ENTIRE front suspension of your car in this two episode series. First I will show you how to remove the wheel bearing, ball joints, control arms, tie rod, strut, and axle. The ball joint and wheel bearing has to be pressed out of the knuckle and I have a bunch of tips and tricks to make that easy. The upper control arm ball joint and tie rod can get stuck in the knuckle so I show some tricks on how to easily remove that. The rest of the suspension parts are pretty simple to remove and replace. NEXT EPISODE: https://www.youtube.com/watch?v=V_g1-WHD4rw Tools and Products: Mevotech Suspension Parts: https://amzn.to/2VKrmfr Rust Paint: https://amzn.to/2Dg5yAV Impact gun: https://amzn.to/2It3KIo Torque Wrench: https://amzn.to/2UO2yFY Bearing Press: https://amzn.to/2Gh8tv3 Ball Joint Puller: https://amzn.to/2P2wmcH Slide Hammer: https://amzn.to/2URoqAe Ball Joint Press: https://amzn.to/2UTxEvR 4lb Hammer: https://amzn.to/2GhZ06A Vice: https://amzn.to/2IfqPyV → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

New 100 Project Car 1991 Pontiac Firebird Rescue Ep1
New 100 Project Car 1991 Pontiac Firebird Rescue Ep1

by Fuzzy Dice P...

Time for the start of a new project car series, this time covering a 1991 Pontiac Firebird Coupe with a 305 small block Chevy engine and a 700R4 transmission. My neighbor needed to get rid of it but didn't want to send it to the scrapyard, so he offered it to me for $100 and I gladly accepted. It has quite a few miles and has been sitting for a few years, so there is a lot of work to be done on this project! Dates of filming: July 8th, 2018 (Buying) July 12th-13th, 2018 (Oil Change, Washing, etc.) Song List (Order of First Appearance): 0:00 Birds in Flight – Dan Lebowitz 1:51 Scapes – Silent Partner 6:40 Pluto – Topher Mohr and Alex Elena 9:13 Golden Days – Topher Mohr and Alex Elena 13:45 Pickup Truck – Silent Partner 16:00 Open Highway – Silent Partner 16:34 Awakening – Silent Partner 17:26 Days Are Long – Silent Partner (All music provided by YouTube's Audio Library royalty free.) Thanks for watching, and joining us on this adventure! Please let us know what you think! Consider supporting us via Patreon as well! https://www.patreon.com/FuzzyDiceProjects Follow our Instagram for more pictures and teasers: https://www.instagram.com/fuzzydiceprojects/

How To Unlock A Car Door without A Key
How To Unlock A Car Door without A Key

by Make It Easy...

Unlocking 3 Different Cars Using Various Tools And Methods Lockout Tool Kit 1 On Ebay Httpsroverebaycomrover1711 53200 19255 01icep id114ipniceptoolid20004campid5338508012mprehttps3A2F2Fwwwebaycom2Fitm2FLock Technology LT145 Super Multi Piece Easy Access and Inflate A Wedgea Ki2F1524832878833Fepid3D70213254726hash3Ditem2380b6534b3Ag3AnVIAAOSwzgBY1B c 2 On Amazon Httpsamznto2YFakAV My Favorite Tools Pocket Screw Driver Httpsamznto2HQrPcE Pocket Flashlight Httpsamznto2FO3SAn Basic Hand Tools Httpsamznto2UjVP6y Code Reader Httpsamznto2HRwdI4 Portable Jump Starter Httpsamznto2HR0V4l Disclaimer Due To Factors Beyond The Control Of Make It Easy Mechanic It Cannot Guarantee Against Improper Use Or Unauthorized Modifications Of This Information Make It Easy Mechanic Assumes No Liability For Property Damage Or Injury Incurred As A Result Of Any Of The Information Contained In This Video Use This Information At Your Own Risk Make It Easy Mechanic Recommends Safe Practices When Working On Vehicles Andor With Tools Seen Or Implied In This Video Due To Factors Beyond The Control Of Make It Easy Mechanic No Information Contained In This Video Shall Create Any Expressed Or Implied Warranty Or Guarantee Of Any Particular Result Any Injury Damage Or Loss That May Result From Improper Use Of These Tools Equipment Or From The Information Contained In This Video Is The Sole Responsibility Of The User And Not Make It Easy Mechanic

How Brake Pads Are Made
How Brake Pads Are Made

by ChrisFix

Brake pad replacement? Ever wonder how to make brake pads? Usually I show you a DIY like how to replace brake pads, but in this video I show you how brake pads are made! Brake pads from this factory: https://www.NRSbrakes.com/nrs-chrisfix/ To make brake pads, we start out with raw pickled and oiled steel. The steel gets stamped into a brake pad backing plate which gets analyzed to make sure it meets OEM specifications. Next the brake pad backing plate goes to the NRS press to get a mechanical attachment. Then the backing plates get galvanized and finally brake pad friction material is added. The manufacturer can add and friction material they want such as semi-metallic, organic, or ceramic friction material. Lastly the shim is made and installed on the brake pad and they can be sent to testing! When it is all said and done, I took the brake pads we made and installed them on my truck with new brake rotors! The company that let me film in their factory is giving all of my fans 20% off their brakes using the code "20off" at checkout. I do not make any money from this! They are doing this to get you guys to try out their new technology brake pads and I will always share a discount to help my subscribers. Here is the link: https://www.NRSbrakes.com/nrs-chrisfix/ How to replace your own brake pads and rotors: https://www.youtube.com/watch?v=6RQ9UabOIPg How to Replace Drum Brakes: https://www.youtube.com/watch?v=Q5j3sKgNoEs Drum to Disc Conversion: Still working on this video → Become a ChrisFix Subscriber: http://www.youtube.com/subscription_center?add_user=paintballoo7 → Instagram: https://www.instagram.com/chrisfixit → Facebook: https://www.facebook.com/chrisfix8 → Website: http://www.ChrisFixed.com → My Channel Home Page: https://www.youtube.com/ChrisFix **If the video was helpful, remember to give it a "thumbs up" and consider subscribing.** Disclaimer: Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

Rebuilding My First Wrecked Supercar
Rebuilding My First Wrecked Supercar

by Tanner Fox

Shop TFOXBRAND! -- http://www.tfoxbrand.com Ive been Watching a ton of "rebuilding wrecked super car" videos lately and have gotten a little inspired, I've seen Lamborghini Huracan by Goonzsquad, Ferrari 458 by TJ Hunt.... so now I'm thinking... do i do it?! Goonzsquad: https://www.youtube.com/channel/UCwO_xoYm2vjhu4kZSxFO5mA Rebuilding My First Wrecked Supercar CAMERA GEAR: Sony a7S II http://amzn.to/2hRNEgC Sony 16-35mm Lense http://amzn.to/2zaxbHC Rode Microphone http://amzn.to/2zbw5eP SD Card http://amzn.to/2zWrznZ GoPro http://amzn.to/2zXEh5W Canon G7 X Mark II http://amzn.to/2BbrI4u TFOX Signature Scooter Wheels! https://www.luckyscooters.com/pages/tanner-fox FOLLOW ME ON INSTAGRAM! - https://www.instagram.com/tannerfox/ TWITTER - https://twitter.com/tannerfox FACEBOOK- https://www.facebook.com/tannerfox2 SNAPCHAT - tannerfoxx BUSINESS - [email protected] outro song! https://www.youtube.com/watch?v=o_cD8A1ZVJ8